Custom Fireplace Surrounds
Getting a Custom Surround requires:
- Photos of the area it's to be installed in
- And ideally a cardboard mock-up of what you want the surround to look like
Keep in the Mind While Constructing The Cardboard-Mock up the Following:
- How Thick or Thin do you want the frame to be?
- Do you want some form of glass within the interior frame of the surround?
- What type of metal? Steel. Aluminum, Stainless Steel, Copper?
- And lastly what sort of finish do you want the metal to have?
Average cost for 48" wide simple standard surround:
- Aluminum $950
- Stainless Steel $1900
Aluminum up to 48" wide = $950.00
From 48" to 60" wide = 1350.00
Stainless Steel up to 48" wide = $1900.00, over 48" = $2700.00
90 degree surrounds up to 30” x 48” x 36” tall = 1350.00
Stainless steel 90 degree surrounds up to 30” x 48” x 36” tall = 2700.00, depending on the actual required detail.
Free Form Surrounds to your imagination!
Plus shipping and crating. Your surround pricing will depend on what is needed to be built.
We typically use Aluminum because stainless steel is susceptible to heat and will and can warp.
Click here or on the Fireplace Surround Picture to see the start to the finish!
The pictures below are of Dr Micheal Marshall Fireplace Surrounds
CLICK on the link or the picture below to see the surrounds with the Star-Burst Pattern!
Click "HERE" or on the picture below to see how this was made and installed.
Rick Rogina Fireplace Surround, FireBalls, Direct Vent Conversion with FireGlass
Click below or on the picture below to see step by step makeover
Jasmine Bals Surround (Free Form)
Click "HERE" or on the picture to see the installation
Jasmine Bals Modern Free Form Surround with Sterling Silver Panels and FireBalls!
CHRIS TOOLEY CONVERSION
Below a long narrow fireplace in Palm Springs looks rather sparse without one of our custom fireplace surrounds.
Below the cardboard mock-up is mounted giving the customer and us a strong working idea of what it will look like and equally assure the customer of its design.
Once the details are hammered out, the stainless steel surround is produced and mounted on the wall. Along with some Gray Base Glass, Starfire Base Glass and Pyrite Base Glass FireGlass.
Beautiful room completed with a beautiful surround.
Click HERE or on the picture below to see how this was assembled!
Black Magic, Sterling Silver Panels and Surround
Terry and Holly Utley had a direct vent fireplace, and as usual they were told that they couldn't convert to FireGlass. So we had to go and do the impossible again modify the system to work with FireGlass.
We then begin with the fireplace surround install, sadly though even with the surround in place the electronics are still exposed, so we had to add a few more pieces to add to assure a clean, finished look.
Now that's much better.
The fireplace is complete with some of our Starfire Base Glass and Cobalt Toppers. Turned out great, thanks ladies.
Our client Rich Guerra put us to the test with this custom fireplace surround, that went above and beyond the call of duty. As you see here the first Surround served as the base for the stone encasing - which will later demonstrate itself as very ingenious/fast/hassle free solution to getting a new fireplace design.
Here is fireplace before the 1st Surround was installed with the old burner and grill removed.
We apply a fresh coat Black fireplace paint and we sit and watch paint dry...
Look closely as you could miss it, but the first surround has been installed with the rock finish. We then pour some crushed lava rock as filler with Bronze Rust Copper Base Glass over a double 24" indoor fireplace burner.
Now the 2nd Surround is installed, along with one 8" Dark Brown FireBall and two 6" Red FireBalls.
The 2nd Surround was Steel construction with a Dark Bronze powder coat and frosted glass inlay. Overall the installation of the Surround gave the fireplace an extra depth of 6 inches.
A radical transformation which only took 40 minutes to complete and without all the mess and drama of reconstructing your fireplace.
Yet to come is a few pounds of Copper Ruby Red Topper and interior lights to spotlight the fireplace when its not burning.
One of our largest custom surrounds, for a surprisingly small fireplace. This brushed Aluminum Surround had an overall of 55" x 44" with a double beveled edge, black glass between the Aluminum frames, and interior frame of frosted glass.
Here's what we walked into.
Created in two pieces the inner frame was the last piece to be mounted.
Here are some great Before pictures from our customer Abbe Fenimore. Sending high quality digital camera photos help us "be there", without the cost to you for us being there.
A short while later, Abbe had his tile replaced before installing his custom surround. Further, you can see the cardboard mock-up on the right hand-side picture. Having done this Abbe is able to really determine his preferred surround size / look / feel, before it actually goes into construction. NOTE* Custom work cannot be returned.
Here the brushed aluminum surround is at last installed along with some Clear Base Glass FireGlass and a double 18" inch steel fireplace burner.
Everything turned out beautifully, Abbe your living room turned out amazing!
These photos come to us from our customer Robert LeWinter, who got the complete Moderustic package. Starting with a a fresh coat of Metallic Charcoal fireplace paint, Starfire Base Glass FireGlass and a one of a kind custom Surround.
Since Robert purchased a light colored FireGlass (Starfire Base Glass) he used a playground sand as base before placing his steel fireplace burner on top of the sand.
The fireplace was completed with installation of his custom Aluminum Surround adorning the fireplace.
Thanks for the great pictures Robert, fireplace turned out great!
This 3 sided Surround demonstrates the flexibility of custom work. Traditionally designed with four sides, this particular fireplace clearly is better suited with only 3 panels.
Sand base with a steel 24" fireplace burner atop providing some great flames.
The Surround was all steel construction, powdered coated gray, with a 2 inch frosted clear glass inside edge.
These pictures come to us from our customer in Huntington Beach CA. They not only converted their fireplace to burn FireGlass but ordered a large custom Aluminum Surround. In the first photo you can see the fireplace freshly painted and emptied ready for FireGlass.
Here the FireGlass and new natural gas burner has been installed. With the proceeding picture showing the clients cardboard mock-up; the mock-up is a great way to gauge the size / shape of the surround before producing it. Remember custom work cannot be returned.
The aluminum surround was brushed horizontally with an 1 1/2" frosted glass inside edge. Inside the fireplace we see Black Base Glass and Black Reflective Base Glass FireGlass.
Jeff Walls Fireplace Upgrade
There were a lot of ideas surrounding what Jeff Wall's fireplace would become...and when we arrived we found a lot of beer and "interesting" wood frame around the fireplace. As well as the typical dirty mess from burning logs.
After some discussion though it was decided that it wasn't the best direction to go. And the frame had to come off - especially if the custom surround was to be installed properly.
So once we cleared out the $350 worth of lumber, we went to getting the area prepared for the custom fireplace surround, a fresh coat of fireplace paint, a new indoor fireplace burner, FireGlass and a few FireBalls.
With the fireplace painted, a bed of playground sand in place and the new fireplace burner installed we are ready for the finishing touches.
Were still waiting for Jeff to send us his evening photos of the the fireplace completed. But here you can see how beautiful everything works together.
Kathy K. had placed her fireplace burner too far back, and as a result got a lot of ugly sooting on her wall.
So when started to work with her on her new Custom Surround we explained that her fireplace burner should be closer to the front so to avoid this again.
To ensure an accurate fit and design we guided Kathy on how to build an inexpensive cardboard mock-up.
The taped area represents the frosted glass and the cardboard represents what will be the brushed aluminum.
This gives both the client and us, a good general idea of what to build and what it will ultimately look like.
And here is the finished piece installed, freshly re-painted and burner installed in the right position :)
This beautiful copper fireplace Surround was built for Stacey in Laguna Niguel, CA. The fireplace surround looked great against the faux painted walls. The FireGlass used was Bronze Rust Copper Base Glass.
She requested a distressed unfinished look to the copper Surround. You can see here the interior rough edges being welded and polished to achieve that distress finish.
And here are a few more pictures of the completed job in her beautiful room.
These pictures were sent to use from our customer in Palm Springs CA. It's a perfect example of the type of FireGlass that really gets a face-lift from having a surround. The custom fireplace surround was designed specifically to our customers measurements and desired look. In this case our customer requested a brushed finished with clear glass edging.
And here is the surround installed. And in case your curious the FireGlass installed was Starfire Base Glass and the interior was painted with ivory white stove paint.
This custom fireplace surround has 4" sides and 3" top and bottom. Every fireplace is a little bit different as we recommend a cardboard template so you can get a preview of what it will look like before hand. It just looked so good, we posted all photos!
The next few pictures were sent to us by Marsha Dashefsky from Palm Springs, CA. Marsha wanted a custom floor-to-ceiling brushed aluminum fireplace surround.
Well, she got it!
The fireplace has 1/4" Clear Base Glass and then we added 1/2" Clear Base Glass and 1/2" Starfire Base Glass. The aluminum can take on a soft or brilliant looks depending on the lighting. The next several pictures are of and with the blinds open.
Another Brushed Aluminum fireplace surround with an inside frame of clear glass.
The next few pictures are from Steve Clendenen in Florida. Propane fireplace (burner pan next). He started with a basic cardboard mock up (very important) to get a preview. Here we go from start to end. we will later post the fireplace completed with the propane burner and glass installed.
Yuk, yuk and YUK!
I didn't particularly like the cardboard. we use full size sheets, but I guess it worked.
Notice the corner post is missing? There are a few rules to remove these.
Do you see the difference? We create nice and wonderful looking fireplaces for you (and the world). We really enjoy building these custom fireplace surrounds.
Robin and Debby Soufer Surround
Click HERE or on the picture below to see all of the NorthStar pictures
Click HERE or on the picture to see how it was transformed to this!
From THIS! (BELOW) again YUK!
Go To Fireplace Surrounds Page 1
Go To Fireplace Surrounds Page 2
Go To Fireplace Surrounds Page 3
Allan Chang Surround
Here is the original Document that Allan Chang sent us "CLICK HERE"
Larry Kraines Fireplace Surround
Click HERE or on the picture below to see how we built this feature
Click HERE or on the picture below to see how this was installed!
And what was used
Other Custom Projects of Interest
Currently under-development, our latest product "tubED" is
a fire feature that uses sound waves to electronically excite
gas molecules. Check out the Video Here.
Tradewinds Fire Pit (click here)
Dallas Fire & Water Fountain (click here)
Dave Sutton Table (click here)
Fire Tables and Portable Fire Pits (click here)
Dominick's Fire & Water Fountain (click here)
Here Is A List Of Our Many Unique Products
|High Quality Base FireGlass - Check it Out!
||Decorative Accent Toppings/ Toppers - Check it Out!
150 different types of burners Single, double, triple, H pattern, Double H pattern, Triple H pattern to name a few. Check it out!
||Metal Fire Rings
Rounds,with and without centers, singles, doubles, triples, quads and quints (5) half rounds,star burners, u burners, h burners and on and on. And if this is not enough we will custom build a burner to your specifications. Any and or all of these burners can and will be calibrated to burn propane or natural gas. Check it Out!
In brushed aluminum, stainless steel, brass, copper, steel or any other metal finish you would desire! Check it Out
||Fireplace Fire Balls
Available in painted or Glazed and Hallow. Color options included RED, LIGHT BROWN, DARK BROWN, SILVER, BLACK, WHITE, DARK GRAY, LIGHT GRAY, FOSSIL TERRACOTTA. Check it Out!
||Fireplace Clay Stones and Concrete shapes and Balls. Available in various sizes and colors.
Check it Out!
||Cookie Cutters For Your Fire Pit
Available in any size or design! Choose your colors from our large selection of FireGlass and we build custom frames that match your logo. Put this in your fireplace or fire pit Check it Out!
||Custom Fireplace Surround Frames Our surrounds can be made from Aluminum or Stainless Steel, or whatever material you like. There are often small imperfections, but that's because they are hand made; not machine manufactured. Check it Out!
For both indoor and outdoor. With optional remote control, propane conversion, vinyl or marine vinyl covers, and pedestals. Size and cost range from:
18" x 18" by 36" high, with windshield.
Clear glass = $1200
Reflective = $1600
18 x 18 by 48" high, with windshield.
Clear glass = $1200
Reflective = $1600
12" x 12" by 36" high
Clear glass = $800
Reflective = $1200
12" x 12" by 48" high
Check it Out!
Clear glass = $800
Reflective = $1200
An alcohol based VortexED specifically designed for indoor use. We offer several creative options using clear glass with various metal bases and stands. Sizes range from
4 x 4 x 12 High
4 x 4 x 14 High
5 x 5 by 14 High
6 x 6 by 18 High
8 x 8 by 24 High
12 x 12 by 30 High
Extra charges apply for Aluminum, Stainless Steel, Copper, Brass, etc
Check it Out!
||Portable Fire Glass Fire Pits
Available in both propane and natural gas. These are made from perforated aluminum or whatever material you'd like. We can customize these to suit any size, shape or material, even with wheels! Check it Out!
||Black Magic, Blue Flames
Our black magic sand will give your fire pit or fireplace that WOW factor you always wanted. Check it Out!
||Stainless Steel Bowls
Our bowls can be made from various materials and designed to your custom needs. We often use these bowls for fire & water features with colored fiber optics lights. Check it Out!
||Large Custom Fire Features
No job is too big or too small. We can provide the right type of custom burners and FireGlass to fulfill the toughest commercial job expectations. Check it Out!
||Small Custom Fire Features
We've helped thousands of people with their custom fireplaces. From homes in Beverly Hills to boutique Hotels. There's no project we fear.
Check it Out!
||Fire Tables with Fire Glass
Want beauty & function together? Custom fire tables provide warmth and elegance. Commercial or residential, no problem. Check it Out!
We've worked on some amazing indoor fire tables over the years. Propane or Natural gas jobs.
Check it Out!
||Outdoor Fire Pits
Our FireGlass can make any fire pit look better! Check it Out!
|Custom Water and Fire Features
We fear no custom jobs. From propane or natural gas flames, water features combined with fiber optic color lights. Just ask, chances are we can make your dreams come true!
Check it Out!